Skip to main content
Security Camera For Home is reader-supported. We earn affiliate commissions from qualifying purchases — how this works.

How to Reset a Wyze Camera

Home/Resources/Buying Guides/Reset a Wyze Camera

Affiliate Disclosure

Some links on this page are affiliate links. As an Amazon Associate, we earn from qualifying purchases — at no extra cost to you. We do not buy, install, or physically handle the cameras we cover; our rankings come from aggregated owner reviews, ratings and expert consensus. Commissions never change our verdicts. How we rank · full disclosure.

Short version: nearly every Wyze camera has a single setup/reset button on the body, and holding it resets WiFi credentials and app pairing without needing separate soft and hard reset steps — Wyze’s process is simpler than most brands. A restart (unplugging power briefly) is still worth trying first for a frozen or unresponsive camera, since it doesn’t require re-pairing.

Installing a battery in a security camera
Wyze Cam v4 (2.5K)
Wyze
Wyze Cam v4 (2.5K)
$39.99 · Check This Product → on Amazon Price as of Aug 22, 2026, 3:13 PM UTC, updated every 3h · subject to change

Wyze’s current flagship camera, at an entry-level price and a solid owner rating, with a simple physical reset button. Local microSD recording means a reset doesn’t risk any cloud-only footage.

Why You Should Get This

If you own this camera and need reset guidance, this is the current flagship model most Wyze owners run.

Benefits

  • Simple physical reset button.
  • No cloud-only footage at risk from a reset.
  • 2.5K resolution with color night vision.

Pros and Cons

Pros
  • Straightforward reset process.
  • No subscription to re-verify after reset.
  • Indoor/outdoor rated.
Cons
  • MicroSD card contents are erased by a factory reset.
  • Cam Plus subscription needed for smart detection after reset.
  • Smaller ecosystem than Ring.

Features

  • 2.5K, color night vision.
  • Local microSD recording.
  • Indoor/outdoor rated.
Wyze Cam OG
Wyze
Wyze Cam OG
$29.97 · Check This Product → on Amazon Price as of Aug 22, 2026, 3:13 PM UTC, updated every 3h · subject to change

The easiest camera in the Wyze lineup to justify buying two of, at an entry-level price with a deep base of owner ratings. It shares the same simple physical reset button as the rest of the Wyze lineup.

Why You Should Get This

If you own this budget Wyze camera and need reset guidance, it follows the same well-documented process as the v4.

Benefits

  • Same simple reset process as the rest of the Wyze lineup.
  • Low price makes owning a spare practical.
  • Indoor or outdoor rated.

Pros and Cons

Pros
  • Cheapest Wyze camera to reset and re-pair.
  • Well-documented process.
  • Works with Alexa and Google Assistant.
Cons
  • 1080p rather than 2.5K.
  • MicroSD card contents erased by a factory reset.
  • Cam Plus needed for smart detection.

Features

  • 1080p, color night vision via spotlight.
  • Indoor/outdoor rated.
  • Motion detection, two-way audio.

Restart Before Resetting

Unplug the camera’s power cable (or remove the battery on a battery Wyze model) for about 10 seconds, then reconnect. This clears temporary freezes and refreshes the connection without wiping any settings, and it’s worth trying before a full reset for a camera that’s simply become unresponsive in the app.

Full Reset via the Setup Button

Locate the small setup button, typically on the underside or back of the camera body — most Wyze cameras have this as an actual pressable button rather than a recessed pinhole, so no paperclip is usually needed. Press and hold it for about 10 seconds until you hear a voice prompt or see the status light begin flashing yellow, which indicates the camera has reset and entered pairing mode. Release the button once you get that confirmation.

Re-Pairing the Camera in the App

Open the Wyze app, tap the + icon, choose Add Device, select the camera model, and follow the QR-code pairing steps. The camera needs to be on 2.4GHz WiFi during this process — if it can’t find your network, that’s the most common snag (see the FAQ above). Once paired, re-enable any motion detection zones and notification settings, which reset to default.

If Resetting Doesn’t Fix an Offline Camera

A reset fixes pairing and configuration problems, not an ongoing weak-signal issue. If the camera pairs fine but keeps dropping offline afterward, see why is my Wyze camera offline for the signal and power causes a reset won’t touch.

Accessories Worth Having on Hand

#1SanDisk 128GB High Endurance microSD Card
SanDisk 128GB High Endurance microSD Card

Best for replacement local storage on a Wyze camera after a factory reset.

$34.99 · Check Price Where to buy: Amazon Price as of Aug 22, 2026, 3:13 PM UTC, updated every 3h · subject to change
#2Universal Security Camera Wall Mount Bracket
Universal Security Camera Wall Mount Bracket

Best for remounting a Wyze camera after resetting and re-pairing it.

$28.99 · Check Price Where to buy: Amazon Price as of Aug 22, 2026, 3:13 PM UTC, updated every 3h · subject to change

Related Guides

For whether Wyze’s budget-first approach and optional Cam Plus subscription make sense for your setup, see is Wyze worth it, and for how its lineup compares, best Wyze cameras.

Straight Answers

Frequently Asked

Does resetting a Wyze camera erase the SD card?

No, a standard reset does not erase footage stored on a microSD card inside the camera — it clears the camera’s WiFi credentials and app pairing, not the card’s contents. If you want to wipe the card too, that’s a separate step done through the app’s storage settings or by reformatting the card directly.

How long do I hold the Wyze reset button?

Most Wyze cameras need the setup button held for about 10 seconds until you hear a voice prompt confirming the reset or see the status light change pattern. Holding it briefly (under 5 seconds) on some models just restarts the camera rather than resetting it, so if nothing changes, hold longer and confirm with the audio cue rather than guessing from the light alone.

My Wyze camera won’t go into pairing mode after reset — why?

This is almost always a WiFi band issue — Wyze cameras pair over 2.4GHz only, and if your router is broadcasting a combined or 5GHz-only network name, the camera can’t find it during setup. Temporarily creating a separate 2.4GHz network name in your router settings, or using your router’s dedicated 2.4GHz SSID if it has one, resolves this in most cases.